Concept 360® - open system cobalt chrome milling and sintering





Concept 360® is a pre-sintered, non-distorting, green machining open system solution for metal dental frameworks including both single units and bridges.
Disc sizes: 98mm x 12mm / 14mm / 16mm



Why use Concept 360® milling discs and the Inertherm® argon sintering furnace?
-
NO BINDER! Much more robust than similar products on the market.
-
in the pre-sintered state it is almost but not quite metallic
-
very easy to machine large frameworks with no distortion
-
open system for an economical solution
-
medical implant Class 2a grade CoCr alloy (composition ISO 5832-4) for ultimate biocompatibility
-
easily sintered to conform with EN ISO 22674 2006 Class 4 metallic material for single and multiple units, and implant retained superstructures
-
CTE of 14.1 allows compatibility with a wide range of ceramics
COMPOSITION BEFORE AND AFTER SINTERING
(APPROXIMATELY 1% ORGANIC BINDER REMOVED COMPLETELY DURING SINTERING)
Co 63.0 Cr 29.0 Mo 6.0 Si, Fe, Mn, C <1
FREE FROM Be, Cd, Pb AND Ni
Above: CONCEPT 360® 'identical' frameworks before and after sintering. Ivoclar ceramic layering.



inert atmosphere argon sintering furnace
-
Argon atmosphere for sintering cobalt chrome
-
Open system and fully programmable
-
Adaptable for zirconia
As seen at IDS, Cologne, 2015
Medical/bespoke QUOTE